LS Starvert iS7 - 18.5kW/22kW 400V - AC Inverter Drive Speed Controller


Order Code: 19620


Delivery normally 3 weeks

Condition: New from Manufacturer with Warranty
Brand: LS
Range: Starvert iS7

LS Industrial Systems Starvert iS7 AC Frequency Inverter for 18.5kW (25HP) 400V 3 Ph motor to 39A at high overload, or 22kW (30HP) to 45A when Fan/Pump rated. Operates in VxF, Sensorless (Open Loop) Flux Vector control or Closed Loop Flux Vector (with optional encoder feedback card). Simple set-up and ready to run from its default settings.

No Keypad included - see linked products below for keypad option and equivalent with keypad.

Dimensions - 280mm Wide x 298mm Deep x 461.6mm high. IP21.

Overload - 150% x 60 seconds, 200% for 2 seconds (18.5kW High Overload).
Overload - 110% x 60 seconds (22kW Fan/Pump rated).
Speed Control Range - 0-400Hz.
Braking - To 20 Ohm minimum external resistor (not supplied) - use the 'Which Resistor' button on this page to select a suitable resistor.

Features - Features - Modbus RTU, 2 x Analogue Inputs, 8 Digital Inputs, 2 x Analogue Outputs, 1 x Digital Output, 2 x Relay Contact sets.
Programmable from a PC via 'Drive View'.
EMC Filters to EN61800-3 to the 2nd Environment C3 (Industrial).

Input Current - 56.9A at High Overload, 40A when Fan/Pump rated.
Input Voltage - 380-480V three phase +10%, -15% at 50/60Hz ±5%.

PCB’s protected to 90%RH as standard.
Wall mount in clean environment or cubicle mount.
Rated at 40C Ambient.
Ventilation space above and below - 500mm.
Ventilation space at sides - 200mm.
4 x 6.5mm diameter mountings at rear for mounting.

Full part number is - SV0185iS7-4NOFD

Download the LS Starvert iS7 Manual from the link below:-

You may also be interested in...

Photo of LS Starvert iS7 Keypad

LS Starvert iS7 Keypad


Order code: 20084

1 in stock

2+ normally 5-7 days

Photo of LS Starvert iS7 Encoder Feedback Card

LS Starvert iS7 Encoder Feedback Card


Order code: 21054

1 in stock

2+ normally 3-5 days