LS Industrial Systems Starvert iS7 AC Frequency Inverter for 3.7kW (5HP) 400V 3 Ph motor to 8A at high overload, or 12A when Fan/Pump rated. Operates in VxF, Sensorless (Open Loop) Flux Vector control or Closed Loop Flux Vector (with optional encoder feedback card). Simple set-up and ready to run from its default settings.
Includes Standard Multiline Keypad. See linked products below for equivalent without keypad.
Size 1 - 150mm Wide x 200mm Deep x 284mm high. IP21.
Overload - 150% x 60 seconds, 200% for 2 seconds at High Overload rating.
Overload - 110% x 60 seconds, when Fan/Pump rated.
Speed Control Range - 0-400Hz.
Braking - To 130 Ohm minimum external resistor (not supplied) - use the 'Which Resistor' button on this page to select a suitable resistor.
Features - Features - Modbus RTU, 2 x Analogue Inputs, 8 Digital Inputs, 2 x Analogue Outputs, 1 x Digital Output, 2 x Relay Contact sets.
Programmable from a PC via 'Drive View'.
EMC Filters to EN61800-3 to the 2nd Environment C3 (Industrial).
Input Current - 10.8A at High Overload, 15.4A when Fan/Pump rated.
Input Voltage - 380-480V three phase +10%, -15% at 50/60Hz ±5%.
PCB’s protected to 90%RH as standard.
Wall mount in clean environment or cubicle mount.
Rated at 40C Ambient.
Ventilation space above and below - 100mm.
Ventilation space at sides - 50mm.
4 x 5mm diameter mountings at rear for mounting.
Full part number is - SV0037iS7-4SOFD
Download the LS Starvert iS7 Manual from the link below:-